So we made a little progress this week. We bought the lumber to do the rest of the table build and began assembling the legs. Turns out, I bought the wrong bolts to attach the legs to the table, so this required a special trip back to the store. Luckily, David didn’t seem to mind so much. I was originally going to make 3 sets of legs, but after mounted the two on the ends we felt this was sufficient. After bracing the legs together, the table is very solid aside from some side-to-side motion, but the top will take care of that. Now all that’s left is to cut and nail on the top pieces. We bought 3 4×8 sheets of 1/2″ plywood for the top. We’ll have to cut that down to 6′ lengths and one of them will need to be cut in half long-ways, so that’ll be fun. Hoping to get it all wrapped up this weekend!